Processing

Processing glass:

__Facet is the oblique lateral side, one of ways of processing of an edge of glass and a mirror at which the facet under a certain corner acts in film.
The facet on a mirror facet on perimetre will betray to your interior solemnity as the oblique edge of a mirror reflects and refracts light, creating "diamond" shine. Using facet glass, even the most dim, it is possible to change extraordinary when a sun beam, passing through an oblique edge of glass, refracts, it forms a rainbow and recovers subjects. Facet can be both direct, and curvilinear, it can be different width and be put on a mirror or glass cloth. Besides, very interestingly and unusually looks double facet which becomes by imposing facets - at first more, then smaller. Facet does of a usual mirror or glass a complete product which, playing the sides, will decorate any interior.

__ Euroedge is a processing of an edge of glass or a mirror by polishing and end face polishing. Edge processing allows to reduce probability of formation of cracks, having chopped off, and also expands possibilities of modern design. After glass cutting, preparation on perimetre has an unattractive appearance with the keen edges, capable to wound any at casual handling. The euroedge gives to a product from glass and a mirror the completeness, attractive appearance, underlines its individuality, and also does its safe.

«Beaten triplex»

__Has flown down protective multilayered is a definition of a word triplex. Besides the protective function assigned to multilayered glass, triplex can be a decor element. Its advantage in multilayer and it is possible to combine various glasses, excellent on a thickness, on colour and under the invoice.
__Оригинально выглядит триплекс с эффектом битого стекла. Битый триплекс составляется из трех слоев, при этом среднее закаленное стекло разбивается. Интерьерные предметы, выполненные с использованием «битого стекла» – будь то столешница, стеклянная дверь, перегородка или лестница – производят очень сильное впечатление и запоминаются надолго.

Bent glass

__Bent glass is a process of bending of the sheet glass, carried out at heats (above softening temperature) under the influence of a body weight or compulsorily under pressure. Gnutoe glass allows to create for an interior architectural details of non-standard forms, whether it be cases, doors or supports of the most courageous outlines. We offer manufacturing bent glasses on individual templates that will give full freedom to design creativity at what bent glass approaches both for transparent, and for bent glasses.

Fyuzing

__ Fyuzing is technics of sintering of glass in special furnaces at temperature above 800 degrees. The cut pieces of the colour glass having uniform factor of temperature expansion, keep within against each other and are located in the furnace where there is a sintering process. Spechyonnoe glass can be any form and a thickness. Spechennoe glass fyuzing - dynamically developing direction modern stained glass arts. Such technology reaches unusual decorative effect stained glasses which having released from metal broach, is organically entered in a modern interior. Fyuzing it is possible to fill interroom doors, doors of kitchen set, a window, a partition and many other things and as stained glass panels can be established directly in a wall without additional designs. Freedom of your imagination and our possibilities will change interior subjects in modern art products.

Sandblasting has flown down

__Sandblasting has flown down, at which particles of quartz sand in strong jet compressed air influence a surface, allows to make of transparent glass matte and as to put any pattern on glass or a mirror. The compositions executed on glass by a method sandblasting, look especially gently, as short-lived ice hoarfrost. It is applied art sandblasting at manufacturing of office partitions, interroom doors, glass table-tops and many other things, drawings on mirrors, as from outside amalgams (a mirror covering), and glasses from outside effectively look. In the first variant in a zone for sandblasting the amalgam leaves, and glass becomes matte. At the second variant drawing is put from outside glasses and reflected in a mirror, strengthening art effect. Unlike matting a film, sandblastings products are steady against external influences and are durable.

Engraving on glass

__Increasing popularity is got by such art processing has flown down, as a laser engraving. The engraving has flown down allows to put any texts, logos, firm symbolics, drawings and photos. In the course of an engraving the laser will remove the top glossy layer of glass and there is a matte image which does not grow dull in due course and does not get out of the shape. The laser engraving of glasses allows not only to put images, but also to cut any necessary forms. In most cases the laser engraving is optimum way of drawing on adaptability to manufacture (speed of process, reliability and firmness of the image).